mini gps tracker.GPS positioning terminal selection and fixation

????

????1. When installing GPS, it should be ensured that the receiving side is facing upwards (sky) and there are no metal objects blocking or shielding above;

????2. To avoid theft and damage, the host selection should be as concealed as possible;

????3. Avoid placing them together with emission sources, such as reversing radar, anti-theft devices, and other onboard communication devices;

????4. It can be fixed with screws or pasted with strong double-sided adhesive of wide sponge;

????5. Suggested installation location:

????Inside the car center console

????Hidden area under the front windshield

????Hidden area under the front dashboard (with non-metallic skin)

????Under the trim panel below the rear windshield

????Inside the front bumper (with a non-metallic surface)

????Under the wiper plate (with a non-metallic surface)

????Attention: If the windshield is pasted with an insulation or heating layer, it will reduce GPS reception signal, causing GPS malfunction and inability to locate. At this time, please replace the installation position of the GPS antenna.

????3. The GPS terminal can be firmly pasted with wide sponge and strong double-sided adhesive

Read recommendations:

GPS Trackers company

cat gps tracker wholesaler

G09L -6 inch Tail light tracker

What are the information methods sent by GPS reference stations.gps tracker app Manufacturing

GPS Principal Component Analysis