How to use the car GPS positioner after installation?plug & play Obd gps tracker Processing

????

????The use of automotive GPS positioner is very wide, especially for the automotive financial risk control industry, I believe many people know. But someone will still ask: Can you start using the GPS locator in the car? If you do this, you will find that this is not possible.

????In fact, after the GPS positioner is installed in the car, activating the GPS positioner is another important step. For many novices, do not understand how to activate and use the car GPS locator. Then let's talk about how the general GPS positioner is activated.

????First of all, we all know that GPS positioning terminals are mainly divided into wired GPS locors, wireless GPS positioners, and OBD interface positioners. The installation of wireless GPS positioner is relatively simple, just find a place in the car to hide the equipment.

????The installation method of wired positioner and wireless positioner is somewhat different. The wired positioner needs to connect the vehicle power supply in order to work continuously for 24 hours. The wireless positioner is usually fully charged at one time, and it can determine the standby and the number of days of use according to the battery size and positioning frequency of the positioner.

????After installing the device, install the device to install the card. The role of the card is to provide network transmission for the device so that the device can transmit information transmission information.

????Whether it is a wired or wireless positioner, the operation steps for installing the SIM card are usually as follows:

?????? Open the rear cover or positioner SIM card slot plug; ? Put the card according to the card plug -in picture on the positioner; ? Turn off the back cover or card slot plug.

????After the SIM card is installed, the positioner is powered on, and the wiring positioner finds the positive and negative pole of the automotive power supply. The negative electrode is easy to find. The place where the body is iron is the negative electrode. The positive electrode is found in the safe, and the car key switch is found, or it is directly connected to the battery. Of course, it is best to install professional and technical personnel to understand automobile circuits!

????However, it is best to connect to ordinary electricity, that is, not affected by the automotive key switch, the power cord directly from the car battery; the side of the positioner has a light to the sky, and the side of the sky should not close the metal object to block the internal GPS antenna. It also receives signals other than 20,000 kilometers.

Read recommendations:

car gps tracker Vendor

Cantrack G05

YG119- Hunting Dog GPS tracker

gps vehicle tracker.What is the price of a vehicle GPS locator

How to distinguish the GPS driving recorder and driving recorder?fleet tracking webfleet solutions