How to install and place the GPS tracker with more accurate positioning and stronger signal

????

????1. The installation location of the gps tracker should be selected

????The GPS signal power of the gps tracker is very low, and the signal reception requirements are high, so there should be no metal shield between the antenna of the gps tracker and the sky. If there are metal objects close to it, it will seriously affect the GPS signal reception, so keep away from these metal objects.

????In addition, gps trackers are electronic products, such as other on-board communication devices in the car, and the signals between them will interfere with each other. You will know when the gps tracker is close to the radio to produce the sound of Zlazila. So the devices are also far away from each other.

????When choosing the installation location, pay attention to these two points and the signal will not be bad.

????2. The angle of the GPS tracker should be chosen well

????When placing it, the antenna of the GPS tracker should be facing up, and the GPS satellite signal is vertically downward. If the side of the antenna that receives the GPS signal is facing down, the sub-signal reception will definitely be discounted. Generally, the locator device will indicate on the surface that you should face the antenna up.

????The above are the two issues that should be paid attention to when installing and placing the GPS tracker. At the same time, it would be perfect if we could pay more attention to dustproof, dustproof, waterproof, high and low temperature, and shockproof.

Read recommendations:

cantrack g05

Cantrack TK100

TK100 (GT06) Vehicle Tracker

What are the different types of car GPS?

How to design an excellent personal GPS satellite locator